News & Events

  • Cross-Disciplinary Strategies and Contemporary Practices

    “Cross-Disciplinary Strategies and contemporary Practices in Mechanical, Aeronautical, and Automotive Engineering2024”

    To impart quality technical education with a focus on Research and Innovation emphasizing on Development of Sustainable and Inclusive Technology for the benefit of society.

    Click for more Info
  • DSCE-Indian Women in 3D Printing

    “DSCE-Indian Women in 3D Printing (IW3DP)”

    On 11/11/2023 & 25/11/2023, a training on 3D printing was organized by IW3DP- STUDENT CHAPTER, the Department of Mechanical Engineering and Department of Computer Science & Design at Nitte Meenakshi Institute of Technology, Bangalore. The workshop was held under the guidance of Dr. Suma V, Vice-Principal & HOD Department of Computer Science and Design and Dr. R. Keshavamurthy, Professor and HOD Mechanical Engineering, DSCE. The workshop was supported, by Dr. B.G. Prasad, Principal, DSCE.

    Click for more Info
  • Jnana Chilume 2023

    “Jnana Chilume-2023”

    Dr. R Keshavamurthy, Professor and Head of Mechanical Engineering at DSCE, led a session on "Recent Advances in Materials, Manufacturing, Design, Mathematical Computing and Sustainable Energy" at the National Conference "Jnana Chilume-2023" Hosted by the School of Engineering, Jain University, Ramanagara.

    Click for more Info
  • Higher Education Opportunities and Working in the UK

    “Higher Education Opportunities and Working in the UK”

    The Mechanical Engineering Department, DSCE hosted a special lecture titled "Higher Education Opportunities and Working in the UK" on November 8th, 2023. The event featured Dr. Kepa Mendibil, the Associate Dean from the Department of Design Manufacturing and Engineering Management at the University of Strathclyde, Scotland. Dr. Mendibil discussed the significance of higher education, leveraging online job platforms, university career services, and the diverse international communities in the UK to launch & build successful careers. Event was Coordinators by Dr ArunaDevi M, Dr Venkatesh M K, Dr Vivek Bhandarkar, Dr Kranti Kumar.

    Click for more Info
  • Ayoodha Pooja

    “Ayoodha Pooja”

    The Department of Mechanical Engineering Hosted main Ayoodha Pooja of DSI on 21st of October 2023, which was graced by Mr. Nishan H Sagar, Joint Secretary, Shri Galiswamy, Secretary, Dr. B G Prasad, Principal, Vice Principals, Heads of Departments, and the staff.

    Click for more Info
  • Strategies to Accept & Overcome Challenges

    “Strategies to Accept & Overcome Challenges”

    The Department of Mechanical Engineering hosted a guest lecture titled " Strategies to accept & overcome challenges " on 19th of October 2023 in which Ms. Sushma L, counsellor, Life Coach, DSI, delivered an insightful talk. Ms. Sushma inspired the students by highlighting the significance of accepting and surmounting challenges in the context of personal development and achieving success. She also shared valuable strategies to tackle these obstacles.

    Click for more Info
  • Advances in Materials, Ceramics and Engineering Sciences (AMCES-2023)

    “Advances in Materials, Ceramics and Engineering Sciences (AMCES-2023)”

    International Conference on "Advances in Materials, Ceramics and Engineering Sciences (AMCES-2023)" was jointly organized by Department of Aeronautical Engineering, Department of Biotechnology, Department of Civil Engineering, Department of Chemical Engineering, Department of Chemistry & Department of Mechanical Engineering from 13th to 15th of March 2023.

  • MoU with Society of Indian Women in 3D Printing Technoogy

    “MoU with Society of Indian Women in 3D Printing Technoogy”

    The Department of Mechanical Engineering-DSCE signed the Memorandum of Understanding (MoU) with “Society of Indian Women in 3D Printing Technology (IW3DP)” with focus on girl student’s empowerment programs and support to train women in India in 3D printing space so that women can contribute greatly towards the 3D printing growth in our country on 06th of February 2023.

  • World Innovation Day

    “World Innovation Day”

    Department of Aeronautical Engineering, Automobile Engineering and Mechanical Engineering jointly organized a seminar on the occasion of "World Innovation Day" on 07th of January 2023. Mr. B. V. Sudharshan, Deputy Managing Director, NTTF, Bengaluru delivered a lecture on Recent Innovations in the world.

  • Industrical Visit to Fritwel Tools and Forgings Pvt Ltd

    “Industrical Visit to Fritwel Tools and Forgings Pvt Ltd”

    Students of 5th Semester, Department of Mechanical Engineering visited "FITWEL TOOLS AND FORGINGS PRIVATE LIMITED" company on 11th of January 2023. The visit mainly focused on giving an exposure on various high precision forging operations and tool design used by an automobile sector catering industry. Dr. B.T. Manjunath of the department coordinated the event.

  • Industrical Visit to Bharat Fritz Werner LTD

    “Industrical Visit to Bharat Fritz Werner LTD”

    The Department of Mechanical Engineering, DSCE, organized a one-day industrial visit under the mentorship of Dr. B T Manjunath, for UG students to Bharat Fritz Werner Limited, Bangalore on 25th November 2022.

  • Application & Research Opportunities in 3D & 4D Printing

    “Application & Research Opportunities in 3D & 4D Printing”

    Department of Mechanical Engineering and the Department of Automobile Engineering jointly organized 2 weeks Faculty Development Program on “APPLICATIONS & RESEARCH OPPORTUNITIES IN 3D & 4D PRINTING” from the 10th to 22nd of October 2022.

  • MATLAB EXPO

    “MATLAB EXPO”

    Prof. Kranthi Kumar K, Assistant Professor, Department of Mechanical Engineering had attended the MATLAB EXPO-2022 organized by Mathworks, Autodesk India Pvt. Ltd. on 8th September 2022.

  • MoU with Nandi Vishwavidyalay

    “MoU with Nandi Vishwavidyalay”

    Department of Mechanical Engineering, DSCE entered into a Memorandum of Understanding with Nandi Vishwavidyalaya, Nandi Toyota, Motor World Private Limited, Bengaluru on 29th of August 2022.

  • Student Membership Drive By “ISHRAE”

    Student Membership Drive By “ISHRAE”

    The Indian Society of Heating, Refrigerating and Air Conditioning Engineers (ISHRAE), conducted a student membership drive at Department of Mechanical Engineering, DSCE on 28th July 2022. The Chapters of the Society participate in, and organize, activities to protect the Environment, improve Indoor Air Quality, help Energy Conservation, provide continuing education to the Members and others in the HVAC & related user Industries and offer certification programs, career guidance to students at the local colleges and tertiary institutions

  • PROJECT OPEN DAY 2022

    “PROJECT OPEN DAY 2022”

    PROJECT OPEN DAY 2022 (Project Exhibition) was held in the Department of Mechanical Engineering on 24thJune, 2022.

    Click for more Info
  • Industry Visit to SANSERA ENGINEERING LTD

    “Industry Visit to SANSERA ENGINEERING LTD”

    The Department of Mechanical Engineering, DSCE, organized a one-day industrial visit under the guidance of Dr. Manjunatha B T, Assistant Professor, and Prof. Rajashekar Hosalli, Assistant Professor, Department of Mechanical Engineering, for UG students to SANSERA Engineering Ltd, Bangalore, on 16th June 2022.

  • Webinar on Analysis of Deformable Bodies

    “Webinar on Analysis of Deformable Bodies ”

    Department of Mechanical Engineering has initiated the live webinar sessions on the topic titled “Stress Analysis of Deformable Bodies”. The event was coordinated by Dr. Mohan Das A N, Assistant Professor, Department of Mechanical Engineering, DSCE. Mr. Rakes M, a recipient of prime minister research fellowship, pursuing his Ph.D at IIT Bombay.

  • TorqX

    “TorqX ”

    TorqX The 10th edition of Torq-A Mechanical Engineering Extravaganza was held from 3rd to 5th June 2022. The event was inaugurated by Dr. C.P.S. Prakash, Principal, DSCE. As part of the annual event Design workshop on Fusion 360 was held in association with Autodesk. The workshop was followed by a Design competition called ‘DESIGN IT’.

    Click for more Info
  • Guest Lecturer on An Engineer to Successful Entrepreneur

    “Automation in Welding Technology”

    DayanandaSagar College of Engineering, Department of Mechanical Engineering had conducted a Guest Lecturer on “An Engineer to Successful Entrepreneur” by Mr T N Pradeep Kumar Naidu, Chief Technical Officer from NIKIT Engineers for 6th semester students on 10th of May 2022.

    Mr. T N Pradeep Kumar Naidu is a basically Mechanical Engineer from Visvesvaraya Technological University and he is heading research department in NIKIT engineers. He had constantly working on Automation in welding technology for 8 years and succeeded in developing a own seven axis welding machine which is completed automated. He had given complete information from an Engineer to Successful Entrepreneur to 6th semester mechanical engineering students.

    Guest Lecture Co-ordinator: Dr.Manjunath. B. T, Asst.Prof, Dept. of ME, DSCE

    Date: 10-05-2022

    Time: 11.15AM – 12.15PM

     

  • Webinar on “Overview of 3D Printing and Metal Additive Manufacturing”

    “Overview of 3D Printing & Metal Additive Manufacturing”

    Department of Mechanical Engineering, DSCE organised a Live Webinar on “Overview of 3D Printing & Metal Additive Manufacturing” on 6th May 2022.

    The workshop was conducted byMr. Vivek Kumar Singh, is an alumni of Department of Mechanical Engineering, Dayananda Sagar College of Engineering. Presently he is pursuing his PhD at IIT Bombay. He introduced many applications and advantages of 3D Printing technology. Also, he thrown the spotlight on the topics, Laser Beam 3D Printing, Electron Beam 3D Printing, Arc based 3D Printing, and Sheet Lamination of metal based 3D printing processes.

  • Industry Visit to SANSERA ENGINEERING LTD

    Industry Visit to SANSERA ENGINEERING LTD

    The Department of Mechanical Engineering, DSCE, organized a one-day industrial visit under the guidance of Dr. Manjunatha B T, Assistant Professor, Department of Mechanical Engineering, for UG students to SANSERA Engineering Ltd, Bangalore, on 6th May 2022.

    The SANSERA Engineering Ltd. was established in 1981 in Bengaluru and commenced commercial production of passenger vehicle components in 1986. The company grew its precision components manufacturing business organically in India by commencing supplies to the two-wheeler vertical in 1996, for off-road vehicles in 2009, and to the light commercial vehicle vertical in 2011. The SANSERA Engineering Ltd. had set up a manufacturing facility dedicated to high precision aluminium and titanium machined aerospace components in 2013. Plant 11 of SANSERA Engineering Ltd. near Bidadi manufactures Forged alloy of aluminium and Engine parts like Connecting Rod, Rocker Arms, Finger Followers, Connecting Rod, Suspension / Steering Parts, and Step Holders.

  • Workshop on “Lean Six Sigma (6σ) Green Belt

    Lean Six Sigma (6σ) Green Belt

    Department of Mechanical Engineering, DSCE organised the three days workshop on “Lean Six Sigma (6σ) Green Belt” in association with Gorur Consultancy, Bangalore from 5th to 7th April 2022.

    The workshop was conducted by Mr. G.N. Sridhar, Quality Consultant, Gorur Consultancy, and he started off by explaining how lack of quality plays a vital role in a downfall of the company with many case studies. In these three days of workshop students had undergone regress training on importance and methods of Lean Six Sigma adoption in any industries.

  • Contemporary Practices

    “Contemporary Practices”

    14th-18th March 2022.

    Click for more Info
  • Best young faculty award

    Best young faculty award

    Prof. M. Madhusudan, Department of Mechanical Engineering, DSCE has been awarded the ‘Best young faculty award’ from International Award Ceremony on Academic Achievers Awards for Engineering, Arts and Management - AAAEAM 2022, in recognition to his outstanding contribution in Academics and Research. The event was organized by Knowledge Research Academy, Coimbatore, TamilNadu on 27th February, 2022.

  • Grant for Research Proposal for the year 2021-2022

    Grant for Research Proposal for the year 2021-2022

    The Department of Mechanical Engineering has been awarded a research grant of Rs.15 lakhs by VTU under VTU Research Grant Scheme-2021 for the academic year 2021-22 on the project "Development of Sustainable Technology for Recycling and Reprinting of 3D Printed Plastic Waste". This will allow us to expand the research capabilities of our existing 3D Printing Laboratory while also strengthening our expertise.

    Principal Investigator: - Dr. Keshavamurthy R., Professor & Head, Department of Mechanical Engineering, DSCE.

    Co-Investigator: - Dr. Vijay Tambrallimath, Assistant Professor, Department of Automobile Engineering, DSCE.

  • Memorandum of Understanding with Ferrous and Non Ferrous Metallurgicals (FENFE)

    Memorandum of Understanding with Ferrous and Non Ferrous Metallurgicals (FENFE)

    Department of Mechanical Engineering, DSCE entered into a Memorandum of Understanding with Ferrous and Non Ferrous Metallurgicals (FENFE), Bengaluru, and the signing ceremony was held on 12th October 2021.

    FENFE recognizes the significance of the Principle of DAYANANDA SAGAR COLLEGE OF ENGINEERING-BENGALURU initiative to be the leader in the field of Mechanical Engineering / Manufacturing Technology related academia in the country. FENFE offers to render assistance for successful completion of projects of eighth semester engineering students and Post graduate students in Engineering in its premises. It also offers to provide assistance in terms of sponsoring Seminars/Workshops/Guest Lectures on mutually agreed and mutually beneficial topics of importance in the fields of Mechanical Engineering/Foundry Science and Engineering.

  • Faculty Development Program on “Applications of 3D Printing Technology in Engineering Education”

    Applications of 3D Printing Technology in Engineering Education

    Department of Mechanical Engineering, DSCE organised the five days Faculty Development Program on “Applications of 3D Printing Technology in Engineering Education” from 20th to 24th September 2021 in virtual mode. The FDP was sponsored by AICTE Training And Learning (ATAL) Academy. Focus of the FDP was integrating 3D Printing Technology in Engineering Education.

    On 20/09/2021, the FDP was inaugurated virtually, the Welcome Address was given by Smt. Mamta Rani Agarwal, Adviser-I, ATAL Academy. This was followed by Address by Prof. Rajive Kumar, Guest of Honor, Member Secretary, AICTE. Then Prof. Alok Kumar Chakrawal, Chief Guest, VC, Guru Ghasidas Vishwavidyalaya, Bilaspur addressed the audience. Whereas Dr. Amit Dutta, Deputy Director, ATAL Academy, proposed the Vote of thanks.

  • Memorandum of Understanding with Ramusha Mentors

    “Memorandum of Understanding with Ramusha Mentors"

    Department of Mechanical Engineering, DSCE entered into a Memorandum of Understanding with Ramusha Mentors, Pune, and the signing ceremony was held on 22nd September 2021.

    RAMUSHA MENTORS recognizes the significance of the Principle of DAYANANDA SAGAR COLLEGE OF ENGINEERING-BENGALURU initiative to be the leader in the field of Mechanical Engineering / Manufacturing Technology related academia in the country. Ramusha Mentors proposes to provide the guidance on internship and problem resolutions, arranges for internship with reputed companies, virtual live trainings, Industry based projects and job support for students of DSCE, Dept. of mechanical engineering. This Memorandum of Understanding is intended to express the broad understanding of the parties regarding their working with each other to the extent possible for their mutual benefit.

  • Memorandum of Understanding with GTTC

    “Memorandum of Understanding with GTTC"

    Department of Mechanical Engineering, DSCE entered into a Memorandum of Understanding with Government Tool Room & Training Centre (GTTC), Bangalore, and the signing ceremony was held on 16th August 2021. GOVT. TOOL ROOM AND TRAINING CENTRE - BENGALURU recognizes the significance of the Principle of DAYANANDA SAGAR COLLEGE OF ENGINEERING-BENGALURU initiative to be the leader in the field of Mechanical Engineering / Manufacturing Technology related academia in the country. GOVT. TOOL ROOM AND TRAINING CENTRE--BENGALURU proposes to make available the appropriate technology and expertise to develop DAYANANDA SAGAR COLLEGE OF ENGINEERING-BENGALURU position as a leading institute providing high quality skilled resources. This Memorandum of Understanding is intended to express the broad understanding of the parties regarding their working with each other to the extent possible for their mutual benefit

  • 2nd Best Project Award at National Level Inter Level Project Competition: DBIT TeXpo-2021

    “Autonomous Precision Landing of Model Rockets"

    Students of 8th semester, Raghavendra N S, Sohail Nadaf, Tusha V Kulkarni and Vivek Srinivas S, under the guidance of Prof. Sanketh S., Department of Mechanical Engineering, DSCE won the ‘2nd Best Project Award’ at National Level Inter Level Project Competition: DBIT TeXpo-2021 for the project entitled “Autonomous Precision Landing of Model Rockets” organised by DBIT –KSCST Intellectual Property Cell. The project was carried out at R&D Centre, Department of Mechanical Engineering, Dayananda Sagar College of Engineering.

  • Best Innovative Model Award - Ornithopter

    “Design and fabrication of Ornithopter”

    Students of 8th semester, Department of Mechanical Engineering, Dayananda Sagar College of Engineering won the‘Best Innovative Model Award’ at National Level Project Exhibition, Dr. TTIT Expo – 2021 organised byInstitution’s Innovation Council, Dr. T. Thimmaiah Institute of Technology, KGF. Project was carried out at R&D Centre, Department of Mechanical Engineering, Dayananda Sagar College of Engineering by Naba Saleel, Nishanth P, Pannaga Hegde and Pranav Srinath under the guidance of Dr. Haseebuddin M R.

    Click for more Info
  • Open day 2021

    “Open day 2021”

    OPEN DAY 2021 (Project Exhibition-2021) was held in the Department of Mechanical Engineering on 16th July, 2021. Dr. Roopesh Kumar. K. E, Senior Manager (Manufacturing), Aditya Enterprises, Bangalore was invited as the guest of honour for the event. The event was presided by Dr.C.P.S.Prakash, Principal, DSCE, Sri. Galiswamy, Secretary, DSCE and Dr.Keshavamurthy R., Head of the Department, Mechanical Engineering, DSCE.

    Click for more Info
  • Webinar on “Lightweight materials for Automotive and Aerospace Applications”

    “Lightweight materials for Automotive and Aerospace Applications”

    Department of Mechanical Engineering, DSCE organized a webinar on “Lightweight materials for Automotive and Aerospace Applications” on 5th June 2021 at 11:00 AM in association with The Institute of Indian Foundrymen, Bangalore Chapter. Dr. S Jeyanthi, presented this webinar to final and third-year students of Mechanical Engineering Department.

    Click for more Info
  • Webinar on What’s Next in Metal 3D Printing?

    What’s Next in Metal 3D Printing?

    Department of Mechanical Engineering, DSCE organised a webinar on “What’s Next in Metal 3D Printing?” on 30thJune 2021 at 6:00 PM. Dr.Yash Parikhgave an insight on the future of manufacturing to final and third-year students of Mechanical Engineering Department.Dr.Yash Parikh is a Postdoctoral Research Associate at Next Manufacturing Center for additive manufacturing research and education at Carnegie Mellon University, USA.

    Click for more Info
  • Webinar on What Industry Needs from Engineering Graduates!

    "What Industry Needs from Engineering Graduates!”

    Department of Mechanical Engineering, DSCE conducted a webinar on “What Industry Needs from Engineering Graduates!” on 20th May 2021 at 11:30 AM. Mr. Vinay S presented this webinar to final and third-year students of Mechanical Engineering Department. Mr. Vinay S spoke on what industry needs and their expectation from coming engineering students.

    Click for more Info
  • Webinar on Skills, with a focus on Manufacturing Industries

    Skills, with a focus on Manufacturing Industries

    Department of Mechanical Engineering, DSCE conducted a webinar on “Skills, with a focus on Manufacturing Industries” on 6th May 2021 at 11:00AM. Mr. T Parabrahman presented this webinar to final and third year students of Mechanical Engineering. Mr. T Parabrahman spoke on the four M’s of manufacturing sectors. He shared his knowledge on how quality products can be delivered at lower costs.

    Click for more Info
  • Webinar on Importance of Skill Development

    Importance of Skill Development

    Department of Mechanical Engineering, DSCE conducted a webinar on “Importance of Skill Developments” on 30th April 2021 at 12:30PM. Mr. Nitin Takalkar, Director, Xerox Corporation India presented this webinar to final and third year students of Mechanical Engineering.Mr. Nitin Takalkar spoke on Hard and Soft skills an engineering student posse irrespective of his/her discipline.

    Click for more Info
Share:
  •  

    An Autonomous Institute Affiliated to VTU, Approved by AICTE & UGC

  •  

    Accredited by NBA & NAAC with 'A' grade.

  •  

    CET Code: E007 | Comed-K Code: E040

    PGCET - MBA: B158 | M.Tech: T822

Contact Info

  •  

    Mahatma Gandhi Vidya Peetha Trust, DSI Institute, Kumara Swamy Layout, Jayaprakash Narayan Nagar, Bangalore, Bangalore Urban, Karnataka - 560078

  •  
    9741882324, 9741889394, 9741214448+91-80-42161750 / 1
  •  
    Admission Enquiry: +918792909121, +919972780251, +918792909113, +919972560251
  •  

    This email address is being protected from spambots. You need JavaScript enabled to view it.