HIGHLIGHTS

FACULTY CENTRIC

  • NPTEL Certificate

    Dr Santhosh K, completed NPTEL certification course on "Roadmap for Patent Creation"


  • NPTEL Certificate

    Dr Vijay T completed NPTEL certification course on "Design Thinking - A primer"


  • NPTEL Certificate

    Dr Nandakumar M B completed NPTEL certification course on "Teaching and Learning in Engineering"


  • NPTEL Certificate

    Dr Naveena B E has completed the course in NPTEL titled " Accreditation and Outcome Based Learning"


  • Online Course

    Dr Nandakumar M B has completed a course on "Introduction to Battery Management Systems"


  • 3D Printing Technology

    Dr Vijay Tambrallimath, Associate Professor and HOD, Automobile Engineering, DSCE delivered a guest lecture on the topic "3D printing technology in education and medical applications" at Faculty Development Program organized by Department of Mechanical Engineering, A P S College of Engineering, Bangalore. The discussion also covered the topic of advancement in shape memory polymers.


  • Workshop on "E-Mobility"

    Dr.Nandakumar contributed as a resource person for “E Mobility” workshop from 11.07.2022 to 15.07.2022 conducted by DTE, Govt of Karnataka for teachers drawn from all parts of Karnataka.


  • Young Achiever Award – Male (ISIEINDIA)

    Dr Vijay tambrallimath has been chosen for the award of "Young Achiever Award (Male)" to be conferred by Imperial Society of Innovative Engineers, India (ISIEINDIA). The award has been considered with respect to academics, research and age.


  • FDP Resource Person

    FDP Resource Person - Dr Vijay T, was resource person at AICTE sponsored FDP on 3D printing in Engineering Education organized by Department of Mechanical Engineering, DSCE on 22nd Sept 2021. The topic was on "Scope of Additive Manufacturing in Engineering Education and its impact in the medical field.


  • Short-term Training program

    Short-term Training program - Dr Jenoris Muthiya Attended AICT sponsored Online- Short-term Training Program on Additive Manufacturing of Multifunctional Nanocomposites organized by IRTT, Erode, Tamilnadu.


  • Dr.Jenoris attended the following FDPs

    a. 5-days Online Faculty Development Program on “Electric Vehicle and Power Systems” organized by Electric Vehicle – Incubation, Testing, and Research Centre of VIT Chennai, in association with School of Electrical Engineering

    b. Online Faculty Development Program on “ Recent Trends in Energy and Power Systems” organized by the School of Electrical Engineering VIT Chennai,


  • Online Course

    Online Course - Divya G S, Asst. Professor of Autommobile Engineering department has completed online course on “Artificial Intelligence in Python”provided by Great Learning Academy.


  • Workshop on “Autodesk Inventor”

    Workshop on Autodesk Inventor was conducted on 03/10/2020 for department faculty by Prof. Ramesh Konaraddi, Asst. Professor, Department of Mechanical Engineering, DSCE.


  • FDP on AICTE Sponsored National Level 5 day Virtual Short Term Training Program

    Divya G S attended a AICTE Sponsored national level 5 day virtual short term training program from 19.10.20 to 23.10.20 on "Drivers of Industry 4.0" organized by NIITE Meenakshi Institute of Technology

    ICINN
  • FDP on Universal Human Values in Education

    Dr. Naveena B E and Mr. Murgayya S B attended 5 days (19-10-2020 to 23-10-2020) online FDP on Universal Human Values in Education which is organized by AICTE. This FDP is specially designed for sharing AICTE's approach for inculcating universal human values and cultural enrichment in Education.

    ICINN ICINN
  • Mrs. Divya G S attended a 5 day Faculty Development Program on “Advances and Research in Mechanical Engineering” organised by Dept. of Mechanical engineering, KSSEM.

    ICINN
  • Vijay T, was invited to present an overview of research journey in DSU for DSU research scholars of 2020-21 batch. The program was held online on 11.07.2020.

    ICINN
  • Vijay T, Asst. Professor has attended a seminar on “co-creating the Future” by Michigan Ross Executive Education on 10.7.2020.
    Dr. Nandakumar M B and Mr. Vijay T, completed the online courses from Coursera.

    ICINN ICINN
  • PPE Kits Recycling Device developed by Dr. Naveena with team of two VI sem students.

    Article on PPE Kits Recycling Device was published by Prajavani News Paper on 19th July 2020. In view of the imperative to combat the COVID-19 pandemic with proper and safe practice, the proposed technology will help the disposal of used contaminated PPE kits and other medical plastic waste in the right way. This concept was developed by the Dr. Naveena B E, Associate professor and his team of 6th sem students Ashik SV and Praveen Mounabhargav.

    ICINN
  • Webinar on “Locust Attack”.

    A webinar on the topic "Locusts, cyclones in the time of COVID-19: the climate impacts will not wait" by CSE, New Delhi and FAO, UN was attended by Mr Vijay T, on 29/5/2020.

  • Webinar on "Electronic Fuel Injection".

    Dr.Nandakumar M B was a Speaker for webinar hosted by Wulken motorcycles on "Electronic Fuel Injection" on 22/5/2020.

    ICINN
  • Webinar on “Career Opportunities for Mechanical Engineers”.

    Dr. H N Suresh, HOD-Dept. of automobile engineering, attended a webinar on " Career Opportunity for Mechanical Engineers in Electric Vehicle Sector" conducted by Decibels, Bangalore, held on 13/5/2020.

  • Webinar on “Home Electricity Footprint”.

    One day webinar on home electricity utilization and methods for reduction of usage by using the electrical equipment optimally was attended by Mr Vijay T, on 2/5/2020.

    ICINN
  • Webinar by Dr Nandakumar M B on “Electronics for Engine Control”.

    Dr. Nandakumar M B delivered a talk on “Electronics for Engine Control” on 19th June 2020 organized by City College of Engineering and AMC College of Engineering.

    ICINN ICINN
  • Webinar by Dr Nandakumar M B on “Design Basics of Electric Vehicles”.

    Associate Professor Dr. NanakumarM B delivered a talk on “Design Basics of Electric Vehicles” on 13th June 2020 organized by Wulkin Motorcycles.

    ICINN ICINN
  • Webinar by Dr Nandakumar M B on “Electronics for Engine Control”.

    Dr. Nandakumar M B delivered a talk on “Electronics for Engine Control” on 6th June 2020 organized by Wulkin Motorcycles.

    ICINN ICINN
  • Mrs. Divya G S, Assistant Professor has successfully completed the following online course and Faculty development program.

    1. Course: 3D model creation with Autodesk Fusion 360.
    2. FDP: Role of Teachers in Quality Enhancement and Accreditation.
    ICINN ICINN
  • Webinar on“Capacity Building on NBA Criteria 1 to 10”.

    Dr. H N Suresh and Vijay T attended a webinar titled “Capacity Building on NBA Criteria 1 to 10” organized by Agarwal Education Solutions on 27-06-2020.

  • Mr. Vijay T, Assistant Professor has participated in One Week Faculty Development Program on “Additive Manufacturing: The Research Scopes and Future Trends” from 22.5.2020 to 28.5.2020.

    aero

    Faculty members of Automobile Engineering Department Mr. Vijay T, Mrs. Divya G S, Mrs. Kavya J T, Mr. Murgayya S B, Dr. Naveena B E, and Mr. Mahesh B R have successfully completed online “Faculty Program on NBA” conducted by Bharati Vidyapeeth College of Engineering, Navi Mumbai on 22.05.2020.

  • Mr. Vijay T, Assistant Professor has completed the online course on “The 3D Printing Revolution” in May 2020.

    aero
  • Mr. Vijay T, Assistant Professor has attended the webinar on “Home Electricity Footprint” on 02.05.2020 organized by The Energy and Resources Institute.

    aero
  • Divya G S, Assistant Professor of Automobile Engineering Department has successfully completed the 6 weeks- course in Coursera on “Electric Vehicles and Mobility” offered by École des Ponts ParisTech, University in France.

    aero
  • Mr. Mahesh B R, Assistant Professor has successfully completed two online courses “Air Pollution- a Global Threat to our Health” and “Electric Power Systems”.

    ICINNICINN
  • Mr. Murgayya S B, Assistant Professor has attended a Webinar on “How to improve Reliability”.

    aero
  • Dr. Naveen B E, Associate Professor of Automobile Engineering Department has participated in Live Webinar Series on “Electric Solar Vehicle Project” organized by ISIE India and he has completed the Webinar Assessment successfully.

    aero
  • Divya G S, Assistant Professor of Automobile Engineering Department has participated in Live Webinar Series on “Electric Solar Vehicle Project” organized by ISIE India from 17.4.20 to 19.4.20 and she has completed the Webinar Assessment successfully.

    aero
  • Mahesh B R, Asst. Professor has successfully completed online course on “Mechanical engineering design: Sheet metal design”.

    aero
  • Vijay T, Asst. Professor has successfully completed online courses on “The Science of Success: What Researchers Know that You Should Know” and “Coursera Administrator Training”.

    ICINNICINN
  • Murgayya S B, Asst. Professor has successfully completed E-Learning program on “Bearings”

    aero
  • Doctor of Philosophy (Ph.D) in Mechanical Sciences (Automobile Engineering)

    Nandakumar M B, Associate Professor was awarded PhD. degree by VTU on 8-2-2020 in its 19th Annual convocation.

    ICINNICINN

    Vijay T, Asst. Professor has successfully completed online course on “Learning How to Learn: Powerful mental tools to help you master tough subjects”.

    aero

    Divya G S, Asst. Professor has successfully completed NPTEL Online Certification on “Manufacturing of Composites”.

    aero
  • International Conference on Innovations in Nanomaterials and Nanotechnology 2019

    Mr. Vijay Tambrallimath, Assistant Professor Department of Automobile Engineering, DSCE, participated in “International Conference on Innovations in Nanomaterials and Nanotechnology 2019”, Bangkok, Thailand, held on Nov 16-17, 2019. The presented research paper received best paper award in the conference chaired by Prof. Yuanhua Lin, Southwest Petroleum University, Sichuan, China. Research papers were presented from numerous countries across the globe such as China, Taiwan, Thailand, Muscat, Japan and so on. Insights to various research approaches and emerging technologies were well discussed across the domain.

    ICINNICINN
  • Department meeting with Principal

    IPrincipal conducted a meeting with all faculty members on 25-01-2020 and discussed about academics and introducing the topics of current trend (Electric, Hybrid and Autonomous vehicles in the curriculum.

    obe
  • Workshop on “Research Methodology

    All research scholars from the department attended one day workshop on “Research Methodology” on 24-01-2020.

    obe
  • Workshop on “Blooms Taxonomy, TLP Best Practices and NBA Tier I”

    Our faculty members attended one day workshop on “Blooms Taxonomy,TLP Best Practices and NBA Tier I” on 22-01-2020 by Dr. Ravi Shankar and Dr. Guru Prasad from BMSCE at DSCE.

    obe
  • International Conference on Advances in Materials, Ceramics and Engineering Sciences (AMCES-2020)

    Dr. H N Suresh and Dr. Nandakumar M B participated in the conference as Judges at AMCES-2020 on 17th and 18th of January 2020 respectively.

    obe
  • Paper Presentation at AMCES-2020

    Paper titled “Feasibility Analysis of Generative Design Approach with Automotive Components as case study” was presented at AMCES-2020 held DSCE on 17th and 18th January 2020 by Dr. Nandakumar M B and our students Ajay P, Nikhil Venkat M, Poorna Chandra L.

  • CSR Activity

    Through NSS unit of DSCE, Dr. H N Suresh, Professor & Head, Department of Automobile Engineering donated a Computer and DSCE- NSS Officer, Dr. K. N. Rama Mohan Babu, Professor & Head, Department of Information Science distributed school bags to students of orphanage “Sampathu” an orphanage center at BCMC Layout, Bengaluru.

  • Visit to ALTAIR

    Dr. H N Suresh, Professor and HOD, Visited “ALTAIR“on 26th April 2019 along with Mechanical HOD.

  • Guest Lecture by Dr. H N Suresh on Quality Tools at MSME Sponsored EDP” conducted by IEM department

    Dr. H N Suresh, HOD, delivered talk on “Quality Tools” at IEM department, DSCE during EDP on 10-04-2019.

    altair1
  • “Invited Talk on CRDI Technology” at City Engineering College

    Mr. Nandakumar M B delivered a guest lecture on CRDI Technologies at City Engineering College, Bengaluru on 26-03-2019.

    crdi
  • “Brain Storming Session on OBE”

    Interaction and Brainstorming session on OBE was held on 26-3-19 to all our faculty members.

    obe
  • VISIT TO KASSIA

    Dr. H N Suresh, Professor and HOD of Automobile Engineering Department visited KASSIA and interacted with Mr. R. Raju, Hon. Vice-president, Kassia and Mr. Shriyans Kumar Jain, Chairman-Sub committee, Skill Development and Entrepreneurship Development, Kassia on 06-02-19 to discuss about MOU, Internships and Project works to the students.

    KASIA
  • FDP ON “INTRODUCTION TO CATIA DESIGN TOOL”

    Our faculty members attended six daysfaculty development programme on “Introduction to CATIA Design Tool” at DSU starting from 09-07-2018.

  • Subject Expert for Recruitment -Mechanical Engineering VKIT, Bangalore

    Dr. Sekhar N, Professor visited VKIT, Bangalore as Subject Expert for recruitment of Mechanical Engineering staff on 15-02-2018.

  • FDP on OBE

    All Our faculty members attended two days FDP on Outcome Based Education(OBE) on 13th and 14th June 2018.

  • ONE DAY WORKSHOP ON “EFFECTIVE TEACHING PEDAGOGIES”

    Our faculty members attended One day Workshop on “Effective Teaching Pedagogies” by Dr.John Jose, Indian Institute of Technology Guwahati (IITG), on 15th June 2018.

  • INTERNATIONAL YOGA DAY: Highlights

    Automobile faculty members participated in International Yoga Day celebrated on 21-06-2018 in DSCE.

  • Faculty Participation

    Our faculty participated in a technical talk arranged by the Department of Mechanical Engineering by resource person Dr B K Chandrasekar on the topic “Thermal Conductivity of Polymer Composites” held on 14th May 2018

  • Expert Visit to MSRUAS for Academic Audit

    Mr. Nandakumar M B, Associate Professor visited MSRUAS on 23-03-2018 as an expert in their academic quality audit process.

  • Faculty Development Program at Oxford College of Engineering

    Following faculties attended two week faculty development program on “World Class New Product Design & Manufacturing” from 1.1.2018 to 13.1.2018

    • Vijay T, Assistant Professor
    • Divya G S, Assistant Professor
    • Murgayya S B, Assistant Professor
    • Kavya J T, Assistant Professor
  • Fire Safety Workshop

    Lab instructor Manjunath N and Mahesh B R attended "Fire Safety" workshop conducted for Non Teaching Staff and Lab Instructors on 17.01.2018 at DSCE campus.

  • 20th ISTE FACULTY CONVENTION-2017

    Faculty members of the department participated in 20th ISTE Faculty Convention – 2017 on 09-12-2017 at Dr. Premachandra Sagar Auditorium.

  • BOE MEETING

    Dr. H. N. Suresh, HOD, Automobile Engineering attended BOE meeting at UBDTCE, Davangere on 14.11.2017.

  • FDP PROGRAM FOR RESEARCH SCHOLARS:

    Two days FDP program on Research Methodology and Presentation Skills for research scholars conducted on 18.11.2017 and 19.11.2017 in DSCE was attended by the concerned faculty members of Automobile Engineering.

  • ADAMYA CHETANA 100th CONSECUTIVE GREEN SUNDAY PLANTING TREE PROGRAM

    DSCE in association with Adamya Chetana celebrating 100th Consecutive Green Sunday Planting Tree Program to commemorate this event as part of Sasyagraha. The Chairman of AICTE Dr. Anil Sahasrabudhe was the guest of honor. Staff and students of Automobile Engineering actively participated in the event held on 26.11.2017.

    aero

    The Joint Training Center was inaugurated jointly by Dr. C.P.S Prakash Principal DSCE and Mr. Abhijit Kalianpur, BOSCH Senior General Manager, After sales/training, on 19-06-2017. An initiative taken by the department in commencing of Skill Development Program (SDP) as part of departmental proficiency center in collaboration with M/s BOSCH to train the students on Automotive Systems.

  • MOU - VOLVO

    Mr. NiklasGustafsson, Chief Sustainability Officer, Volvo Group and, Chairman, Volvo Group India Private Limited, Kamal Bali, President and Managing director, Volvo Group India Private Limited. handed over ‘Driveline model’ to Dayananda Sagar College of Engineering (DSI), Bangalore on 25th September 2017, Monday and also signed a MOU with DSCE. Galiswamy, Secretary, DSI Dr. C P S Prakash, Principal, DSCE. Prof. R Janardhan, SEVP (DSI),Pro Vice chancellor (DSU) were present and graced the occasion.The other delegates from Volvo for the event Bengtsson Gunnar , M U Ganapathy, Raviraj Joseph, Rakesh Borah, Cherian Metzen, Paul Abraham, Priya Kulkarni, Rajesh Powar, Vijayadasa Udupa, Haribabu, Anjan YVK, R Senthilkumar were present over the function.

  • SIGNING OF MOU WITH BOSCH ON AUTOMOTIVE LEARNING

    An MOU with BOSCH on Automotive Learning, a Joint certification course with DSCE, Automobile Department was signed on 08/02/2017 at 11-00AM in Board Room by Principal, DSCE. and J Sundar, Head-Technical Support and Services, BOSCH, Shweta Magazine, Manager Technical Service and Support, BOSCH was also present during this occasion.
    aero
  • INAUGURATION OF SAEINDIA DSCE COLLEGIATE CLUB

    SAEINDIA DSCE Collegiate Club was inaugurated on 5th October 2016 in DSCE AV auditorium at 10 AM by Sri. Mr. KP Murthy, Vice-Chairman SAEINDIA Bangalore Section.
       
    aero
  • Divya G.S. Asst. Prof, Dept. of Automobile Engineering participated in Two Day Workshop on “Research Methodology” held at Cambridge Institute of Technology, Bengaluru in association with VTU, Belagavi during 21st& 22nd October, 2016.
  • Mr. Vijay T, Asst Professor attended Pre-Conference Workshop on “Design & Analysis of Composite Structures” on 29th August, 2016 jointly organized by Dayananada Sagar University, Bangalore and The International Association for The Engineering Analysis Community at DSU campus.
  • Divya G S, Asst. Professor of Automobile Engineering Department has attended a one day workshop on ‘Fabrication, Testing, and Modeling of Advanced Composite Materials’ at NIE on 16th March, 2016. Guest for the function, Dr. Swaroop Bylahally Visweswaraiah, Structural Analysis Engineer, McGill University, Canada, inaugurated the event and discussed importance of advanced composites in modern era with the case study of fuel tank of helicopter. In the afternoon session, hands on training were provided for the fabrication of polymer based glass fiber reinforced composites.
  • Prof. Sekar N has participated in the Faculty Development Program on “Global Food Situation and Developments in Education, Markets, Logistics, Production Systems, Biology and Engineering” held on January 13, 2016 at Alliance University.

Workshops

  1. Two Day Workshop on “Welding Challenges in Automotive Engineering” 20-21 Feb, 2015, Organized by Automobile Engineering, DSCE and Indian Welding Society, Bangalore Centre
  2. Design and testing of aero models by M/s Jaypee Group conducted workshop from 14th -16th Sept 2012 for 150 students.
  3. International Conference on Convergence Science Engineering & Management Education & Research, Sept 2013, DSCE

STUDENT CENTRIC

 

One-day Workshop on “EcoDrive: Accelerating Sustainable Electric Mobility”

Our students won 1st Prize with cash prize of Rs 20,000/- and 3rd prize with cash prize of Rs 5000/- in “One-day Workshop on “EcoDrive: Accelerating Sustainable Electric Mobility” Organized by INAE Bangalore Chapter and Dayananda Sagar University (DSU) held on 24 May 2024"

Read more..

KSCST Projects 2024

Student Projects 2023

MSME Funding of Vendor Cart

Rs 8 lakhs fund approved under Incubation Component of MSME Innovative Scheme( Incubation, Design & IPR) of MSME Champion Scheme for GoI assistance for "Design of low cost electric operated vendor push cart for economically lower back ground people"

h1

Design of Electric Bike Chassis

“Design of electric bike chassis with frontal storage for convenient access” patent published by B R Rohith , Venkatesh Gowda B S , Aakash K P , Sudeep V on 10.12.2021.


4-Speed Epicyclic Powertrain

“4-speed epicyclic powertrain with electromagnetic clutch for electric-vehicle” patent published by Vishnu Athreya ,Prathamesh Jadhav, Vishwanath Aradhya, Shreyas Kumar on 17.06.2022


Winning of Project Champion Ship

"4-speed epicyclic powertrain with electromagnetic clutch for electric-vehicle and Rock-E design of Electric vehicle power train has secured 2nd and 3rd position in SRISHTI-2022 Auto Expo project exhibition competition 2022 held at BMS college of Engg, Bangalore from 25-27th July 2022

h1

DSCE Electric Buggy

DSCE Electric Buggy – campus vehicle developed by students of batch 2021

h1

Yoga Day celebration on 21.6.2021

It was organized by Dr. Vijay T, in collaboration with ISHA Yoga Centre, Coimbatore. Isha volunteer Mr. Anil Kashinath presided over the event and briefed about the various simple home practices.

h1 h1

 


Webinar: “Diesel engine & after-treatment product developments for meeting BS VI emission norms.”

The webinar on “Diesel engine & after-treatment product developments for meeting BS VI emission norms.”was jointly organized by Departments of Automobile Engineering on 17/06/21.The speaker for the webinar session was Dr.S.Karthikeyan, Divsional Manager, Ashok Leyland Technical Center, Chennai. The program was a success with sixty plus participants including Students as well as Professors. Through this webinar, the participants gained a greater knowledge on gained knowledge on diesel engine combustion and exhaust system.

h1 h1

 


Webinar: “Scope of Automobile Engineering”

An interactive webinar was conducted on 12/6/21 titled “Scope of Automobile Engineering” and was presided by our Principal Dr. C P S Prakash and HOD. Ms.ShriyaSashidhar, our proud Alumni and also the 1st Rank holder in VTU was the speaker.

h1

 


Webinar: “Automotive Trends and Impact of Electronics”

The webinar on “Automotive Trends and Impact of Electronics”was jointly organized by Departments of Automobile Engineering. The speaker for the webinar session is Mr.GokulakrishnanPanneer, Senior system Engineer,Stellantis FCA.. The program was a success with over a hundred and above participants including Students as well as Professors. Through this webinar, the participants gained a greater knowledge on Autonomous vehicles and ADDAS systems and various opportunities to build a career for a budding engineer.

h1

 


Webinar: “An Overview of Indian Auto Sector & the Available Career Opportunities”

An online Webinar on 18.05.2021 was conductedtitled “An Overview of Indian Auto Sector & the Available Career Opportunities” by Mr.VenkatarajDeputy Director-General of SAEINDIA, who works with Top Mobility Organizations of India like Mahindra, Maruti, ARAI, Renault Nissan, Boeing in India. Welcome address was by Dr.H.N.Suresh, Head of the department, Automobile Engg, DSCE. Webinar was attended by 100+ students and staff.

h1 h1

 


Webinar: “CFD for Automotive Engineers”

A webinar on the topic “CFD for Automotive Engineers” was held on 19.05.2021 at 11.30 AM for the students of Automobile Engineering organized by Dr. Vijay T, Assistant Professor, Automobile Engineering, DSCE. Mr. Divyam Verma, PhD Scholar, School of Aeronautics, NPWU China and an alumni of Automobile Engineering, DSCE was the speaker. The discussion was very helpful to students in understanding the concepts of CFD and its application and future scope.

h1

 


Webinar: “Profile building solutions”

A webinar on the topic “Profile building solutions” was held on 22.05.2021 at 11 AM for the students of Automobile Engineering organized by Dr. Vijay T, Assistant Professor, Automobile Engineering, DSCE. CJ Shruti Goyal a LinkedIn profile builder was the speaker at the event and webinar was focused on profile building, profile critique, career development and development of linkedIn profile.

h1 h1

 


Student Achievents

Master Class for Motor Control on EV Application (3 Days) completed by following students:

  1. Prajith P
  2. Nivas U
  3. Faraz Ali Khan
  4. Vishwas V Devadiga
  5. MD. Saad Imam
  6. Mohammed Ameeruddin Inamdar

 

h1

 


Mr. Sagnik Samaddar, 1st year, Automobile Engineering for being selected as Computer Science Managed Network Expert, on behalf of management, HOD & staff we congratulate him.

h1

 


Webinar on "Interactive session with 1st generation Entrepreneur on 25/3/21"

The speaker Mr. Srinish Talanki is an alumus of Automobile department. He is the founder of Shrinish Turners and a consultant for manufacturing and production for novel start-ups. They are manufacturers of CNC turned components catering to automobile, aerospace, railways and general engineering sectors.

h1 h2

 


Webinar on "Intellectual Property Rights on 26/3/21"

Mr Afsar S, Patent & Trademark attorney, Bangalore was the speaker.The session was co-ordinated by Dr Naveena B E and Mrs Divya G S,Mr. Aakash PK, 6th Sem Automobile Engineering participated in Virtual Technical Event “AUTOSPARX – 2021”at National Level on 18th and 19th march 2021.

h1 h2 h1

 


Webinar on "Electric Solar Vehicle Project"

A Four Day Webinar was held on “Electric Solar Vehicle Project” by Imperial Society of Innovative Engineers from 24th to 29th November, 2020 for the students and staff of Automobile Engineering department, coordinated by and was coordinated by Dr. Naveena B E and Mrs. Divya G S. Outcome of this is to understand Electrical vehicle design, project management, battery management and entrepreneurship skills.

h1 h2 h3 h4

 


DSCE “ADDA”

A faculty student interaction session for orientation of fresh students was held on 19th November 2020.

h5 h6

 


Webinar on Noise Vibration and Harshness

Mr.Pannerselvam, Aimil Ltd. Bengaluru delivered lecture on NVH for 3rd, 5th and 7th Sem students on 9-10-2020

ICINN

Young Achiever

Ashik S V is a student Entrepreneur from Dayananda sagar college of engineering, 3rd year Automobile department. He invented and patented a new technology called Thin film technology to control Air pollution and has started a company on his own known as Panjurli labs. He has received much recognition from the media and received Prajavani youth achiever of the year 2020 award and facilitated by Rotary Club by being awarded as Rotary zonal achiever.

Click Here to read more...
Click Here to view the video...

Ashik S V and Manoj S,completed the online courses from Coursera

ICINN ICINN

 

Akash K P of IV semester, has completed online certification course on “Automotive sketching and drawing” organized by Divyaguru Education and Research Pvt. Ltd.

ICINN

 

Corona Warrior Volunteer Program

Lokesh A C, IV Semester student of Automobile Engineering Department has completed the online training course on “Corona Warrior Volunteer Program” and worked as Volunteer in the team “Corona Warriors” formed by the Civil Defense Karnataka to overcome the Current Corona situation. He worked in Food packing and distribution, Crowd control, Data collection of out of state migrants at RSSB Peenya with Karnataka State Police.

Click Here to read more...

 

Ayushi Singh, Aakash Prabhuraj K, Venkatesh Gowda B S, Pavan Kumar, and Sridhar R Revankar successfully completed online courses offered by Coursera in May 2020.

 

“Bicycle for Transportation – Past, Present, Future”

Mayur Punamiya, Prajwal G Thanjavur, Ranjith M, Saathvik Satish, Divya G S have published a review paper on the topic “Bicycle for Transportation – Past, Present, Future” in International Research Journal of Engineering and Technology, Volume 7, Issue 4, April 2020.

 

Automobile Engineering Students Ayushi Singh, Aditya Belvadi, Naveed Hassan Mir, Vishnu Athreya S, Nkul N, Ajay P, Nandan Vivek Bapat and Punith Nagaraju O have completed the courses offered in Coursera during Covid-19 Holidays.

 

Puneeth Nagaraju O, student of 6th Semester has successfully completed online course on “ Autodesk Fusion 360 Integrated CAD/CAM/CAE”.

 

Nakul N, student of 8th Semester has successfully completed the NPTEL Online Certification course on “Introduction to Rocket Propulsion”.

 

Young Achiever

Prajavani a daily newspaper honored our 6th Semester student Ashik S V for his innovation on “Air Pollution Control Device” on 13-02-2020.

 

NPTEL EXAM

Our 6th Semester student, Akshay Kumar M cleared NPTEL course on “Innovation by Design” during November 2019.

 

Visit to IMTEX Forming 2020.

Students of IV and VI semester along with faculty visited IMTEX Forming 2020 exhibition on 27-01-2020.

SAE SUPRA Team Interaction.

HOD and SAE faculty advisers interacted with DSCE motorsports SUPRA team on 20-01-2020.

Paper Presentation at AMCES-2020.

Paper titled “Feasibility Analysis of Generative Design Approach with Automotive Components as case study” was presented at AMCES-2020 held DSCE on 17th and 18th January 2020 by Dr. Nandakumar M B and our students Ajay P, Nikhil Venkat M, Poorna Chandra L.

Brain storming session on ASME Human Powered Vehicle (HPVC).

A brain storming session on ASME human powered vehicle by our students was held on 20-9-19 to get ready for 2020 competition.

Students Participation in “TORQ 8.0" organized by Mechanical Department

Our students participated in the design and clay modeling competition held at DSCE by Mechanical Department during TORQ 8.0 on 04-04-2019.

Paper Presentation by Ashik 4th Semester student in Torque 8.0

Ashik of 4th semester presented a paper titled “An Innovative Device to Reduce Soot Pollution” at TORQ 8.0 conducted by the department of mechanical engineering, DSCE on 04-04-2019.

VTU Rank Holders of 2014-2018

HOD, Staff and Students of Automobile Engg., Department congratulate the following students on their achievements.

USN NAME PERCENTAGE RANK PHOTO
1DS14AU046 SHRIYA SHASHIDHAR 84.78 I
1DS14AU011 B SURAKSHA SHETTY 81.16 IV
1DS15AU409 SUCHETH S 79.39 VII
1DS14AU055 VIKAS S 79.22 IX
1DS14AU058 ZOHAIB A DODDAMANI 79.07 X

Visit to Future Mobility Show at BIEC, Bengaluru

Our faculty members Nandakumar M B and Vijay T along with our SAE student members visited Future Mobility Show 2019 on 28-02-2019 at BIEC, Bengaluru.

IV2FMS


Industrial visit to “TVS Motor Company Ltd., Hosur”

Students of VI Semester visited TVS 2 wheeler Manufacturing Plant at Hosur on 27-02-19 along with our faculty members Mr. Vijay T and Mahesh B R.

IV2TVS


Industrial visit to KSRTC – “Regional Workshop, Bangalore”

The students of 4th Sem Automobile Engineering, DSCE visited KSRTC – Regional Workshop, Kengeri, Bangalore on 25/02/19 as part of curriculum. The Engineers at KSRTC briefed about work flow & process carried out for fabrication of bus body building & reconditioning of Internal Combustion Diesel Engines.

IV2KSRTC


Student Presentation Videos


  • Department staff and students celebrated ethnic day on 03-04-218.
  • Students of VI & VIII semester participated, presented and published three papers in “International Conference on Trends in Industrial & Value Engineering, Business and Social Innovation” held between 02-04-2018 and 04-04-2018 at DSCE.
  • Farewell to final year students by 2nd and 3rd year students was held on 19-04-2018 evening and Dr. C P S Prakash, Principal and Dr. H Ramakrishna, Vice Principal graced the occasion.
  • Department staff and students celebrated ethnic day on 03-04-218.
  • Electric Go Kart Design Challenge (e GKDC):
    Nikhil Venkat M, Prathwish Mestha and Saathvik Satish of IV Semester participated in the above event held on 12th-16th February 2018 at Kari Motor Speedway, Coimbatore and were declared Runners-up.
       
  • SAE – TVS EGA (Electrifying Green Aspirations) Competetion:TVS has donated new TVS Jupiter Vehicle to the team “NEBULA” of our department to be modified as a Hybrid Electric Vehicle to compete in SAE TVS EGA to be held in April 2018.
  • CIL Programme:
    • Students of 6th Semester attended CIL programme on 22-02-2018 organized by CIL, DSCE.
    • Students of 4th Semester attended CIL programme on 28-02-2018 organized by CIL, DSCE.
  • VTU Rank Holders of 2013-2017
    HOD, Staff and Students of Automobile Engg.,Department congratulate the following on their achievements.
    Sl. No. Name Photo Rank Percentage
    1 MdLaeeq Ahmed ahmed.jpg 1 80.23 %
    2 Niranjan M ahmed.jpg 3 78.26%
    3 Abhishek Dinesh ahmed.jpg 5 77.91%
    4 Rajath R Jain ahmed.jpg 6 77.80%
    5 Nithesh Kumar V ahmed.jpg 8 76.96%

  • Shrinish T S of 2012-2016 batch, bagged IV Rank in VTU.
    Sl. No. USN Name Rank % Photo
    1. 1DS12AU049 SHRINISH T.S. IV 78.32 %
  • Automobile Engineering students of batch 2011-2015, have secured five VTU Ranks. This is the third consecutive batch bagging the gold medal.
    Sl. No. USN Name Rank %
    1. 1DS11AU033 Raj Kamal I 81.22
    2. 1DS11AU020 Kavan Hegde IV 77.80
    3. 1DS11AU013 Dhanush H Krishnan VI 75.59
    4. 1DS11AU052 Sriyansh Kumar jain VII 75.22
    5. 1DS11AU014 Gaurav nayak s X 74.49
  • INDUSTRIAL VISITS: on 26th and 27th of April were organized for VI and IV sem students to M/S SANSERA Engineering Co. Ltd.

  • National Design Competition: CADD centre has conducted “National Design Competition- to identify the right talents” for 4th semester students on 29/02/16. Following students are selected in the 1st round and CADD Centre is providing free training for them for the 2nd round.
    Selected Students list as follows:
    1. Kunal Chudasama
    2. Manoj Kumar V N
    3. Akash Kuber
    4. Mohammed Abrar
    5. Shah Faizan
    6. Manohar M
    7. Karthik Raja R
    8. Aditya Vikraman
    9. Rakshith B R
    10. Niraj Bothra

  • INDUSTRIAL VISIT: IV sem Students of Automobile Engineering Department had an industrial visit to KSRTC Workshop at Kengeri on 16th Feb, 2016.Various repairs and reconditioning, body building and painting shops were shown and explained during the visit.
  • Students demonstrated their working model projects for the purpose of experiencing life for a day in a University Campus, for the invited dignitaries, staff, and students of various schools and colleges at the exhibition held at DSU Innovation Campus, Kudlu Gate, Hosur main road, Bengaluru from 5-8 January, 2016.

 

Share:
  •  

    An Autonomous Institute Affiliated to VTU, Approved by AICTE & UGC

  •  

    Accredited by NBA & NAAC with 'A' grade.

  •  

    CET Code: E007 | Comed-K Code: E040

    PGCET - MBA: B158 | M.Tech: T822

Contact Info

  •  

    Mahatma Gandhi Vidya Peetha Trust, DSI Institute, Kumara Swamy Layout, Jayaprakash Narayan Nagar, Bangalore, Bangalore Urban, Karnataka - 560078

  •  
    9741882324, 9741889394, 9741214448+91-80-42161750 / 1
  •  
    Admission Enquiry: +918792909121, +919972780251, +918792909113, +919972560251
  •  

    This email address is being protected from spambots. You need JavaScript enabled to view it.